Sheet Coil

image: Sheet coil		Double yoke measuring coil system For the quality control of single sheet electrical steel in 500 x 500m format Construction according to IEC 60404-3 Contra-inductivity to compensate air flux Mechanical yoke operation Pole areas parallel to surface Protected against electrical overloading add to checklist

The BROCKHAUS sheet measuring coil corresponds to the provisions of the IEC standard 604040-3. The lower yoke and upper yoke enclose the body of the coil with windings required for the primary and secondary coils. The measuring coil constructed in this way is firmly integrated into a metal housing and corresponds to the IEC standard with regard to dimensions and construction. The upper yoke is raised mechanically in order to insert the sample into the measuring coil. The used mechanism ensures that the upper yoke is lowered steadily and evenly.

Technical data: Sheet Coil Construction: special housing with double yoke, exciting and measuring coils Windings: 5 x primary 400 Cu Ð 1.06 mm 1 x secondary 400 Cu Ð 1.0 mm Measuring frequencies: 3 Hz to 100 Hz Field strength: 1 A/m to 10.000 A/m* Polarization: 0.001 T to 2 T** Probe mass: max. 1.5 kg Sample dimensions: 500 x 500 mm     * Depending on the electrical steel measuring instrument selected ** Depending on the quality of the electrical steel being tested    Request further information: add to checklist

More coils :
Strip Coil		Punched Parts Sensor		Ring Coil		Epstein Frame		Sheet Coil		Inline Mea- suring Coil

Use with:
Electrical Steel Tester MPG

Postfach 1327 | D-58463 Lüdenscheid
Gustav-Adolf-Str. 4 | D-58507 Lüdenscheid
Telefon +49 (0)2351 3644-0 | +49 (0) 700 - brockhaus
Telefax +49 (0)2351 3644-44

mail@brockhaus.net