Punched parts sensor

Image: Punched parts sensor		Double yoke measuring coil system For the quality control of punched parts and narrow slit strips Suitable for all geometries and small material dimensions Designed in accordance with IEC 60404-3 Optimal sequencing of coils Reference story add to checklist

For measuring the magnetic properties (hysteresis loss etc.) of punched parts and narrow slit strips of oriented or non-oriented electrical steel. The material dimensions of an available and reproducible measurable sample can be as small as 8 mm x 3 mm because of the very favourable configuration of the yoke and coils. The C 510 measuring sensor covers a wide range of measuring requirements for punched parts and narrow slit strips. In addition, as a result of the very small measuring area, it enables a highly reliable inspection of material edges after cutting and punching.

Technical data : Punched Parts Sensor Construction: double-yoke with exciting and measuring coil Pole area: 26 x 25 mm Field strength: 5.000 A/m* max. Polarization: 0,001 T to 2 T** Sample dimensions: min. length/width/height 8 x 3 x 0.2 mm Sample thickness: max. 1.1 mm     * Depending on the electrical steel measuring instrument selected ** Depending on the quality of the electrical steel being tested    Request further information: add to checklist

More coils :
Strip Coil		Punched Parts Sensor		Ring Coil		Epstein Frame		Sheet Coil		Inline Mea- suring Coil

Use with:
Electrical Steel Tester C 510		Electrical Steel Tester MPG		AC/DC- Hystograph

Postfach 1327 | D-58463 Lüdenscheid
Gustav-Adolf-Str. 4 | D-58507 Lüdenscheid
Telefon +49 (0)2351 3644-0 | +49 (0) 700 - brockhaus
Telefax +49 (0)2351 3644-44

mail@brockhaus.net